Contact Support


ISO 27001 Compliance Report

Netsparker helps you to identify your web application’s shortcomings in complying with ISO 27001.

As an internationally adopted standard, the ISO 27001 Information Security Management Systems Standard specifies how the data should be managed. It lists the controls and objectives to increase, develop, and manage the security of data.  

  • Following scans, Netsparker lists all vulnerabilities and other issues detected in your web application. But, if you only want to view those vulnerabilities that violate ISO 27001, you can generate the ISO 27001 Compliance Report.
  • This report lists all vulnerabilities and issues that may infringe the ISO 27001 standard and classifies them according to the sections in the standard. It also displays all technical information for each identified vulnerability and, if any, proof of exploit.
  • Both Netsparker products allow you to generate the ISO 27001 Compliance Report. This report principally addresses the needs of developers and IT personnel.
There can be other vulnerabilities and security issues that can be found in your web applications but not listed in the ISO 27001 Compliance Report. The report does not replace an official one and cannot be used as an ISO 27001 Compliance report. 
Click to view a sample ISO 27001 Compliance Report.

For further information, see Overview of ReportsReport Templates, and Built-In Reports.

ISO 27001 Compliance Report Sections

There are four sections in the ISO 27001 Compliance Report:

  • Scan Metadata
  • Vulnerabilities
  • Vulnerability Names and Details
  • Show/Hide Scan Details

Each is explained below.

Scan Metadata

This section provides details on the following items:

  • Scan Target
  • Scan Time
  • Scan Duration
  • Description
  • Total Requests
  • Average Speed
  • Tags
  • Risk Level

For further information, see Progress, and Scan Duration and Speed.


This provides a numerical and graphical overview of:

  • Numbers                                The numbers of issues detected at various Vulnerability Severity Levels
  • Identified Vulnerabilities                The total number of detected vulnerabilities
  • Confirmed Vulnerabilities                The total number of vulnerabilities that Netsparker verified by taking extra steps such as extracting some data from the target.

Image of Netsparker ISO 27001 Compliance Report

Vulnerability Summary

This section provides a summary of information about each discovered vulnerability and categorizes them based on severity. For example, if Netsparker determines a vulnerability as Critical, it requires immediate attention.

If you click on an identified vulnerability, you access detailed information, such as HTTP request and response codes and body, about the vulnerability and, if any, Proof of Exploit. If Netsparker finds a vulnerability but has no proof of exploit, Netsparker presents a certainty degree about this issue.

This table lists and explains the columns in the Vulnerability Summary.




This shows that Netsparker has verified a vulnerability.


This provides the name and link to a detected issue that attackers can attack.


This is the HTTP method of the request in which Netsparker sent the payload. It demonstrates what Netsparker deployed in order to identify an issue.


This is a reference to a resource that contains the issue.


This is the variable used to identify the issue.

For further information, see Vulnerability Severity Levels.

Vulnerability Names and Details

This section describes all identified issues and vulnerabilities, along with their Impact and Proof of Exploit. It also explains what Actions to Take and a Remedy for each one, including External References for more information.

This table lists and explains the headings in the Vulnerability Names and Details section.




This is the name of the identified issue.


This is the label to group, organize, and filter issues in the target web application.

Proof of Exploit

This is a piece of evidence to prove that the vulnerability exists and information that is extracted from the target using the vulnerability.

For further information, see Benefits of Proof-Based Scanning™ Technology.

Vulnerability Details

This displays further details about the vulnerability.

Certainty Value

This indicates how much Netsparker is sure about the identified issue.


This shows the effect of the issue or vulnerability on the Target URL.

Required Skills for Successful Exploitation

This gives details on how malicious hackers could exploit this issue.

Actions to Take

These are the immediate steps you can take to decrease the impact or prevent exploitation.


This offers further steps to resolve the identified issue.

External references

This provides links to other websites where you can find more information.


ISO27001: This provides further information to help you comply with ISO27001 standards.

Remedy References

This provides further information on the solution for identified issues.

Proof of Concept Notes

These notes demonstrate in principle how a system may be compromised.


This is the whole HTTP request that Netsparker sent to detect the issue.


This is the reply from the system against the payload.

Show/Hide Scan Details

This section provides some profile and policy settings that Netsparker uses to adjust its scanning to reach more coverage. For example, it lists all enabled security checks.

It provides information on your preference in selecting this scan so that developers have more details on how the scan was run.

For further information, see Security Checks.

How to Generate the ISO 27001 Compliance Report in Netsparker Enterprise
  1. Log in to Netsparker Enterprise.
  2. From the main menu, select Scans Recent Scans
  3. Next to the relevant scan, select Report, then Export.
  4. From the Report drop-down, select ISO 27001 Compliance.
  5. From the Format drop-down, select an option.
  6. If required, select one of the following to configure your report:
  • Exclude Addressed Issues excludes those issues on which you've already taken action. (All Information level findings are marked as Accepted Risk automatically by default. To change this behavior, see Do not mark Information issues as accepted risks in General Settings).
  • Export Confirmed includes only those issues that are confirmed.
  • Export Unconfirmed includes only those issues that are unconfirmed.
  1. Click Export

You can view the report in the Save location.

Image of Netsparker ISO 27001 Compliance Report

How to Generate the ISO 27001 Compliance Report in Netsparker Standard
  1. Open Netsparker Standard.
  2. From the ribbon, select the File tab. Local Scans are displayed. Double-click the relevant scan to display its results.
  3. From the Reporting tab, click ISO 27001 Compliance Report
  4. From the Save Report As dialog, Select a save location, then Save.
  5. The Export Report dialog is also displayed at this point, with the Path field already populated from the previous dialog.
  6. From the Export Report dialog, you can decide on:
  • Policy: Select the default report policy or customized report policy (see Custom Report Policies).
  • Format: Select HTML and/or PDF format        
  • Vulnerability Options (select one or all):
    • Export Confirmed: When selected, the report will include confirmed vulnerabilities.
    • Export Unconfirmed: When selected, the report will also include unconfirmed vulnerabilities.
    • Export All Variations: Variations mean that if Netsparker identified some passive or Information level issues in more than one page, it does not show all these variations. However, users can change this by enabling or disabling this option.
  • Header and Footer:
    • Enter relevant information that will appear in the header and footer section of the report.
  • Open Generated Report: When selected, your report(s) will be shown when you select Save.

      7. Select Save.

The HTML Report format is interactive thanks to the Severity Filter. For example, if you prefer not to see Best Practice or Information details, you can deselect them. When you click on the plus sign under Vulnerabilities, you can access more information on the issue. Also, you can Hide or Show Remediation.

Highly accurate, fast & easy-to-use Web Application Security Scanner

Get a demo